Flat Rate Shipping : $9.99
Free Shipping on all orders over $99

66 x 78 Inch Hot Tub Cover (5.5 x 6.5 feet)

$595.00
Free Shipping in Continental US
Quick Overview

The 66'' x 78'' Master Spas® factory direct OEM replacement hot tub cover (SKU: 66x78) is designed to fit your Master Spas hot tub. It comes standard with a 1.5lb foam density, long steam stopper cushions to help prevent any sort of heat loss. It has been upgraded to include two rubber grip handles and is made of a high quality marine-grade vinyl covering that is mildew treated and unfazed by UV rays.

Please Note: The Cover Fold Is 78 Inches

(6-10 Weeks)
Important:

Please note that all covers are made to order. They are NOT in stock.

ColorArrow
  • Color
  • BlackBlack
  • BourbonBourbon
  • Briar BrownBriar Brown
  • Cajun RustCajun Rust
  • CharcoalCharcoal
  • Coastal Gray / AshCoastal Gray / Ash
  • GrayGray
  • Hunter GreenHunter Green
  • MahoganyMahogany
  • Mayan BrownMayan Brown
  • MochaMocha
  • NavyNavy
  • OxenOxen
  • ParchmentParchment
  • Sky BlueSky Blue
  • TanTan
  • WalnutWalnut
  • WildwoodWildwood
  • Reduces cover weight by 25%
  • 3x stronger than traditional vinyl
  • Provides superior tear and abrasion resistance
  • Made with recyclable materials so it's environmentally superior
    (+$65.00)
WeatherShield ColorArrow
  • WeatherShield Color
  • Jet BlackJet Black
  • Desert TaupeDesert Taupe
  • Brazilian MahoganyBrazilian Mahogany
  • Coffee BrownCoffee Brown
  • Oxford GreyOxford Grey

* Required Fields

$595.00
Add to Wish List
Quick Overview

The 66'' x 78'' Master Spas® factory direct OEM replacement hot tub cover (SKU: 66x78) is designed to fit your Master Spas hot tub. It comes standard with a 1.5lb foam density, long steam stopper cushions to help prevent any sort of heat loss. It has been upgraded to include two rubber grip handles and is made of a high quality marine-grade vinyl covering that is mildew treated and unfazed by UV rays.

Please Note: The Cover Fold Is 78 Inches

This 66'' x 78'' OEM custom replacement hot tub cover is made of a high quality, 100% marine-grade vinyl. This high-end vinyl helps to make sure your cover is unaffected by mildew, discoloration, UV rays, mold, etc. It consists of a six-inch foam insulation that tapers down to four inches along the sides, and has a 1.5lb foam density for amazing energy efficiency. 

Additional cover highlights include:

• EPS Foam Cores (with tapers)- The insulation items on this cover are vapor sealed to help prevent any sort of moisture from coming into the hot tub cover. Moisture is released and condensation is prevented when it comes to these covers! 

• Full length heat seal - These full length heat seal cushions are great when keeping in the heat from your hot tub! Additionally, there is a 12 oz. chemically resistant vinyl scrim on the heat seal.

• Three Panel Skirt Design - The cover skirt that is located around the edge of your hot tub cover also keeps in the heat. Additionally it prevents dirt and other outside elements from getting into you hot tub. 

• Two rubber grip handles (upgraded) - These two rubber grip handles help you to easily lift up your hot tub cover... without ripping! Helps tremendously with ease of use. 

• Four Release/Lock Hardware Connections -  With the releasing and locking hardware connectors, your cover has built-in locking straps to keep your cover safe, secure and in place.

• Bottom Vinyl (11 Ounce Reinforced Weft, Mildew Treated) - The vinyl located on the bottom of the hot tub cover is mildew treated, as well as being reinforced (11 oz. reinforced weft).

• Double Stitched- 27 points of strength add structural reinforcements at all the stress points on your cover - providing years of use.

• Compliance to ASTM Standards for Safety Covers

• 18 Color Options - This OEM factory direct replacement cover is available in 18 different colors, all of which are shown in swatches above in photo array.

----

Be sure to check out our Spa Cover Warranty here!

Customer Reviews