CoverMate III Eco Replacement Parts
You have purchased the CoverMate 3 Eco B if you were in need of a lower-cost hydraulic-assisted cover lift. Which is a great CoverMate cover lifter to own! This cover lifter for the CoverMate 3 Eco B is built with aluminum brackets (different from the composite brackets found in the CoverMate 3 Eco), but still is built with the utmost quality in mind. The CoverMate III Eco B comes with a full-length middle crossbar, aluminum tubing (powder-coated), non corrosive mounting brackets, extender brackets and more. Below you’ll see Spa Headquarters offers replacement parts for this product such as coupler inserts, coupler bar, pivot arms, shock locking and non-locking parts, and more!
The Shock Locking for CoverMate III Eco B is one of the parts that make up this economically efficient choice for a hydraulic cover lifter. The Shock Locking connects to the shock itself and is sold for $34.50 by Master Spa Parts. It is recommended that you do not use the CoverMate III Eco B during high winds as to protect the cover and the hydraulic cover lifter from possible damage.
-
The Shock Non-Locking for CoverMate III Eco B is one of the parts that make up this economically efficient choice for a hydraulic cover lifter. The Shock Locking connects to the shock itself. It is recommended that you do not use the CoverMate III Eco B during high winds as to protect the cover and the hydraulic cover lifter from possible damage.
-
The Pivot Arm for CoverMate III Eco B is one of the parts that makes up this economically efficient choice for a hydraulic cover lifter. The Pivot Arm connects to the mounting brackets and the support arms and is sold here by Master Spa Parts. It is recommended that you do not use the CoverMate III Eco B during high winds as to protect the cover and the hydraulic cover lifter from possible damage.
-
The Left Support Arm for CoverMate III Eco B is one of the parts that makes up this economically efficient choice for a hydraulic cover lifter. The Left Support Arm connects to the support arm and is sold here by Master Spa Parts. Prevent possible damage to the lift by remembering to unlock the shock before pulling the CoverMate Cover down.
*To determine if this is the correct replacement arm you need, look at your cover in the open position. While facing the spa and open cover lifter, the left support arm is on left side.*
-
This is the replacement right aluminum bracket or your CoverMate Cover Lifter by Leisure Concepts.
*To determine if this is the correct replacement bracket need, look at your cover in the open position. While facing the spa and open cover lifter, the right bracket is on the right side.*
-
This is the replacement aluminum left bracket for your CoverMate cover lifter.
*To determine if this is the correct replacement bracket need, look at your cover in the open position. While facing the spa and open cover lifter, the left bracket is on the left side.*
-
This is the Right Support Arm for the CoverMate III Eco B cover lifter.
*To determine if this is the correct replacement support arm need, look at your cover in the open position. While facing the spa and open cover lifter, the right support arm is on the right side.*
-
The Coupler insert (2 per unit) is a long part used to lengthen your raise and lower bar for your hot tub cover.
-
This replacement OEM factory direct coupler insert is a long part used to lengthen your raise and lower bar for your hot tub cover.
-
This bracket kit for CoverMate III Eco B contains left and right brackets and a screw kit for your aluminum hydraulic shocks.
-
This kit is a factory direct, replacement screw kit that contains a bag of screws used for installation with the CoverMate III Eco B.
-
This extender bracket set is used for and with the Leisure Concepts CoverMate III Eco B Cover Lifter
