Flat Rate Shipping : $9.99
Free Shipping on all orders over $99

215" x 94" Swim Spa Cover for H2X Trainer 18 and MP Signature

Replacement Cover for Your Swim Spa
Have a general question? Ask us
$1,474.00
SKU: Cover18
Free Shipping in Continental US
Quick Overview

This 215" x 94" Master Spas OEM replacement cover is built for H2X Trainer 18 and MP Signature swim spas, offering superior insulation and durability.

ColorArrow
  • Color
  • BlackBlack
  • BourbonBourbon
  • Briar BrownBriar Brown
  • Cajun RustCajun Rust
  • CharcolCharcol
  • Costal Gray / AshCostal Gray / Ash
  • GrayGray
  • Hunter GreenHunter Green
  • MahoganyMahogany
  • Mayan BrownMayan Brown
  • MochaMocha
  • NavyNavy
  • OxenOxen
  • ParchmentParchment
  • Sky BlueSky Blue
  • TanTan
  • WalnutWalnut
  • WildwoodWildwood
(2-6 Weeks)
Important:

Please note that all covers are made to order. They are NOT in stock.

  • Reduces cover weight by 25%
  • 3x stronger than traditional vinyl
  • Provides superior tear and abrasion resistance
  • Made with recyclable materials so it's environmentally superior
    (+$65.00)
WeatherShield ColorArrow
  • WeatherShield Color
  • Jet BlackJet Black
  • Desert TaupeDesert Taupe
  • Brazilian MahoganyBrazilian Mahogany
  • Coffee BrownCoffee Brown
  • Oxford GreyOxford Grey

* Required Fields

$1,474.00
Add to Wish List
Quick Overview

This 215" x 94" Master Spas OEM replacement cover is built for H2X Trainer 18 and MP Signature swim spas, offering superior insulation and durability.

This 215" x 94" Master Spa Factory OEM swim spa replacement cover is made of energy-efficient six-inch foam insulation that tapers down to four inches along the sides, and features a 1.5 lb. foam density — all of which helps prevent significant heat loss from your swim spa! It’s crafted from high-end marine-grade vinyl that helps resist mildew, UV damage, and more.

Additional replacement cover highlights include:

  • EPS Foam Cores With Taper – As noted above, this 18' x 8' replacement swim spa cover features 6" foam insulation that tapers to 4", along with a 1.5 lb. foam density to help prevent moisture from seeping into the cover over time.
  • Full Length Heat Seal – The full-length heat seal helps lock in your swim spa’s heat by minimizing escape points. A 12 oz. chemically resistant vinyl scrim adds extra durability to the outer edge.
  • Three Panel Skirt Design – This design improves heat retention and also helps block outside debris, dirt, and weather from getting into your swim spa.
  • Two Upgraded Rubber Grip Handles – These easy-to-grab rubber handles make it easier to lift and reposition your swim spa cover without slipping — a helpful upgrade over standard handles.
  • Four Release/Lock Hardware Connections – Built-in locking straps help keep your cover secure in windy conditions or when your spa is not in use.
  • Galvanized Steel Brackets – Reinforced steel brackets provide added structural strength and reliability to the cover’s core.
  • Bottom Vinyl – The underside of the replacement cover features an 11 oz. reinforced weft, mildew-treated bottom vinyl that adds durability and protection against spa moisture.
  • Double-Stitched Reinforcement – With 27 key points of reinforcement, the double stitching helps provide long-lasting structural support and resistance to wear and tear.
  • ASTM Certified for Safety – This cover meets ASTM safety standards when properly installed with a locking system.
  • 18 Color Options – Available in 18 colors, which can be previewed in the swatch images above.

Be sure to check out our Spa Cover Warranty here!

Questions from Our Customers

Have a question about this 8' x 18' Cover for Master Spas (94" x 215")? It may have been answered in the Q&A below.

Don't see your question answered by our team? Ask your own below. The hot tub experts at Master Spa Parts are ready to help.