This product is a oxidizing Shock Treatment. Activates Bromide Salts. Energize is a non-chorine buffered oxidizer used to activate available bromine from water previously treated with Brom-Aid.
Size: 2 Ibs.
One capful holds approximately 1 oz.
Initial Treatment:
- Turn on filtration system to circulate the water.
- Treat Spa / Hot Tub water with Prevent II before the addition of Brom-Aid, Chlor-Aid or Energize.
- Add Brom-Aid or Chlor-Aid as directed.
- Add 8 ounces of Energize for each 500 gallons of water to activate the release of bromine from Brom-Aid and to shock oxidize the Spa / Hot Tub.
Daily Treatment:
Add 4 ounces of Energize per 500 gallons after using Spa / Hot Tub to oxidize organic contaminants. Allow water to circulate for 15 minutes.
For greatest effectiveness, make sure pH is in the recommended level of 7.2 – 7.6. Energize is buffered to not adversely affect the pH of the water. During heavy bathing loads or frequent use, increase the addition of Brom-Aid or Chlor-Aid and Energize. Maintain a bromine residual of 2 – 4 ppm or 1.5 – 3.0 chlorine.
Note: Do not mix with other chemicals before adding to the Spa / Hot Tub water.
Active Ingredient: Potassium Peroxymonosulfate - 31.5%
Inert Ingredients: 68.5%
Shipping and Delivery
Free shipping is available to the Continental United States for orders over $99. If order happens to be backordered (which is very rare), it will ship within 5-10 business days. If you need something shipped faster, please contact us and we will do our best to accommodate.
All orders are charged at the time of order. Next-day/two-day shipping, orders must be received prior to 3:00pm CST (and will not be processed on Saturdays, Sundays or Holidays.)
Returns & Replacements
*No Returns Available For Cover Lifters, Covers, or Electronics*
Orders must be returned unused and in original packaging, if applicable, within 30 days of receipt. At time of receipt of returned order, you will receive a refund less the restocking fee.
Restocking Policy: Selecting replacement parts and filters can be difficult, so you will never be charged a re-stocking fee if you call or email to ensure you are placing the correct order. Customers are responsible for paying the shipping costs on all parts that are returned due to incorrect ordering. A 20% restocking fee will apply on a case-by-case basis.
Please fill out the return order form on the back of your original packing slip when returning parts. Parts should be returned to:
Master Spa Parts, Inc.
2140 W Wisconsin Avenue
Appleton WI 54914
International Shipments
Free shipping is not available on International Shipments (including AK and HI). Customers shipping outside the continental United States are responsible for any additional duties and taxes depending on shipment location and cost of goods.
